Saturday, November 1, 2003

BMP Trivia Question

The BMP handbook contains plenty of useful information including a helpful Culvert Sizing Chart. Using that chart, what is the proper culvert diameter needed at a crossing that drains 75 acres on light, sandy soils, and that has an average slope of 10%?

Click on "comments" below and post your answers.

Wednesday, October 1, 2003

BMP Informer - October 2003

October Issue of the BMP Informer Now Available




October BMP Q&A

By: Jake Donellan, BMP Forester (Ret.), Texas Forest Service

Q:   I recently got a chemical applicator’s license and plan on offering chemical site preparation to landowners as part of my service. I don’t have a pilot’s license, so all of the site prep will be done from the ground with an ATV and a skidder modified for chemical applications. Are there any special BMPs that I need to follow when I spray?

A:   As many of you probably guessed, there is a section in the Bluebook that deals the application of silvicultural chemicals. Silvicultural Chemicals are addressed in section 8.0 and begin on page 24 of the Bluebook. This section provides information on both ground and aerial application of chemicals.

The first thing you want to do is to familiarize yourself with the chemical’s characteristics. You should read the label and the Materials Safety Data Sheet (MSDS) for the chemical you are working with and follow all instructions. The next part of the planning process is to be familiar with the topography, soils, and drainage pattern of the land you will be working on in addition to any other factors that might be important for preventing water pollution during application.

You need to inspect your equipment for leaks. Leaks can lead to areas of high concentration of the chemical you are using and present a danger of direct chemical application into surface waters.

During ground application, carefully plan applications to avoid direct and indirect entry of chemicals into streams and other impoundments. Use extreme caution in areas immediately adjacent to open water. Special care should be taken when chemicals are used in the streamside management zone (SMZ). Avoid applying chemicals to vegetation protecting eroded slopes, gullies, drainages, and other fragile areas subject to erosion. Exercise care not to exceed intended or allowable dosages. Avoid chemical application during windy conditions that may cause unintended drift.

Aerial application guidelines are very similar to those of ground application. When conducting an aerial application you should also carefully plan application to avoid direct and indirect entry of chemicals into streams and other water bodies. Leave well-marked buffer zones between the target area and surface water. Realize that significant portions of the SMZ will probably be left untreated. Chemicals should not be applied when stream pollution is likely to occur through aerial drift. A spray device capable of immediate shutoff should be used. Shut off chemical application during turns and over open water.

During any type of application of chemicals, should a spill occur, shovel up a dike around the spill. Use absorbent materials (kitty litter, slaked lime, sawdust, soil, etc.) to soak up fluids. Keep the spill from flowing into streams or bodies of water. Some spills will require that you notify the appropriate authorities.

You can get a copy of the Bluebook at your local Texas Forest Service office or you can view it online at http://txforestservice.tamu.edu/water. If you have any questions regarding BMPs please contact me.

* This article was published in the October 2003 issue of the Texas Logger

Monday, September 1, 2003

BMP Trivia Question

In Part I of the BMP handbook, guidelines are covered for eight different areas of forest operations. Can you list the remaining seven areas?

1.) Planning
2.)
3.)
4.)
5.)
6.)
7.)
8.)

Click on "comments" below and post your answers.

Tuesday, July 1, 2003

BMP Informer - July 2003

July Issue of the BMP Informer Now Available


July BMP Q&A

By: Jake Donellan, BMP Forester (Ret.), Texas Forest Service

Q:   I am harvesting timber on a landowner’s tract and I came across an area that looked to me like some sort of wetland area. The landowner said he didn’t think that it was a wetland and not to worry about it. I know that timber harvesting is allowed in wetlands but how exactly can you tell what one looks like.

A:   You are correct, timber harvesting is allowed in wetlands under Section 404 of the Clean Water Act Amendments of 1977 as long as it 1) qualifies as “normal silviculture,” 2) is part of “established” silvicultural operation, 3) is not part of an activity whose purpose is to convert a water of the United States into a use to which it was not previously subject, 4) follows the fifteen Mandatory Road BMPs, and 5) contains no toxic pollutant listed under Section 307 of the Clean Water Act in discharge of dredge or fill materials into waters of the United States.

To address your question, let me first quote the definition of a wetland. The U.S. Army Corps of Engineers (U.S. ACE) and the Environmental Protection Agency jointly define wetlands as:
Those areas that are inundated or saturated by surface or groundwater at a frequency or duration sufficient to support and, under normal circumstances, do support a prevalence of vegetation typically adapted for life in saturated soil conditions. Wetlands generally include swamps, marshes, bogs, and similar areas.
While this definition is fairly lengthy and in depth, the last sentence provides us with the best idea of what a wetland looks like; “swamps, marshes, bogs, and other similar areas.”

There are three criteria that the U.S. Army Corps of Engineers look at when delineating wetlands: (1) hydrophytic vegetation (plants that have the ability to grow, compete, reproduce and or persist in anaerobic soil conditions), (2) hydric soils (soils that are saturated, flooded, or ponded long enough during the growing season for anaerobic soil conditions to develop, and (3) wetland hydrology (inundation by water sufficient to support hydrophytic vegetation and develop hydric soils). All three criteria must be present under normal circumstances for an area to be identified as a jurisdictional wetland.

There is an entire section, starting on page 82, in the Bluebook that is dedicated to helping you understand what a wetland is and how to minimize the impacts in these sensitive areas. This section also includes a list of the 15 Mandatory Road BMPs on pages 93 & 94. If you believe you are or will be operating in a wetland or wetland-like area, then you should definitely review the Forest Wetlands section of the Bluebook before beginning operations.

Landowners or loggers who have more questions or who are still unsure about wetlands should contact the Texas Forest Service or the U.S. Army Corps of Engineers. There are two U.S. ACE districts that cover east Texas, the Forth Worth District which you can reach at (817) 886-1326 or the Galveston District (409) 766-3004.

You can get a copy of the Bluebook at your local Texas Forest Service office or you can view it online at http://txforestservice.tamu.edu/water. If you have any questions regarding BMPs please contact me.

* This article was published in the July 2003 issue of the Texas Logger

Sunday, June 1, 2003

BMP Trivia Question

On what two pages in the Texas Forestry Best Management Practices handbook (the Bluebook) can you find a chart that gives the information about which grasses are best suited to plant based on soil types, and season?

Click on "comments" below and post your answers.